In the early 1990’s Badger Ordnance identified the need for quality Tactical scope rings and mounts designed to meet the higher demands of the emerging Military and Law Enforcement tactical shooting community. Badger Scope Rings are machined from steel barstock as serialized matched pairs. This assures that both rings are identical and eliminates the damaging effects of mismatched mass produced rings.
Maximized rings are designed to fit MIL STD 1913 (also called Picatinny) optical rails and are finished with Mil Spec Black Oxide.		  All the hardware on our rings was designed by us and is made to our specifications including the Torx® screws that hold the scope securely in the rings. MAX-50 Rings are made to the same specifications as our standard rings but are 1 INCH wide! The MAX-50’s have 60% more holding power and were designed specifically to tame the recoil of the .50 BMG Six 8-40 Torx® screws secure each scope cap to the ring. The Maximized series of Scope Rings and Rails are made to the highest tolerances in the industry.
 
SCOPE RINGS SIZING CHART
  
P/NSizeABWeight P/N Size A B Weight
           
306-08
306-09
306-10
306-11
306-13
306-14

306-16
306-17
306-18
306-19
306-20
306-21
306-24

Standard
High
Ultra high
MAX-50 Standard
MAX-50 High
34mm dia. 
Schmidt&Bender
Standard Alloy
High Alloy
Ultra high Alloy
MAX-50 Standard Alloy
Medium
Medium high
USMC M40A3 "Issue Item" 		.823"
1.125"
1.400"
.823"
1.125"
1.000"

.823"
1.125"
1.400"
.823"
.885"
1.00"
.886"
.232"
.534"
.809"
.232"
.534"
.330"

.232"
.534"
.809"
.232"
.294"
.409"
.293"		7.3 oz.
9.5 oz.
10.7 oz.
11.3 oz.
15.2 oz.
8.6 oz.

3.9 oz.
4.6 oz.
5.1 oz.
5.5 oz.
7.8 oz.
8.7 oz.
8.9 oz.		   306-27
306-28
306-29
306-39
306-50
306-51
306-52
306-62

306-75
306-76
306-79
34mm High Alloy
USMC DMR "Issue Item"
USN EBR Alloy "Issue Item"
USMC SASR "Issue Item"
MAX-50 Ultra high
MAX-50 Ultra high Alloy
Medium Alloy
Medium High 1 pc
Ring Mount (3.375“ long)
USMC M40A3 34mm “Issue Item”
USMC SASR 34mm “Issue Item”
Extra high Alloy
1.275"
1.031"
1.25"
1.125
1.45"
1.45"
.885"
.885"

1.00"
1.49"
1.25"
.605"
.440"
.659"
.534"
.859"
.859"
.294"
.294"

.330"
.82"
.659" 		4.1 oz.
12 oz.
4.3 oz.
12.5 oz.
17.5 oz.
8.5 oz.
3.9 oz.
4.6 oz.

11 oz.
16 oz.
5 oz.
           
 
MAXIMIZED SCOPE RINGS
 

Scope Ring
Standard Height
Height 0.823’’, diameter 30mm
P/N 306-08
P/N 306-16 MAX-Alloy

 
Scope Ring
Medium
Height 0.885’’, diameter 30mm
P/N 306-20
 
Scope Ring
Medium High
Height 1.0’’, diameter 30mm
P/N 306-21
 
Scope Ring
High
Height 1.125’’, diameter 30mm
P/N 306-09
P/N 306-17 MAX-Alloy
 
Scope Ring
Ultra High (AR-15 flat top)
Height 1.400’’, diameter 30mm
P/N 306-10
P/N 306-18 MAX-Alloy
 
34mm Scope Ring
for AR series rifles
Height 1.257’’, diameter 34mm, MAX-Alloy
P/N 306-27
 
34mm Scope Ring
for Schmidt & Bender
Height 1.0’’, diameter 34mm
P/N 306-14
  AR-10 & SR-25 style rifles
Extra High
Height 1.25”, diameter 30mm.
P/N 306-79
       
   
Medium 1 piece ring mount
Height .885”, diameter 30mm, length: 3.375", weight: 4.6 oz.
P/N 306-62 Max-Alloy		  

MILITARY ISSUE RINGS
 

These rings have been designed specifically for the United States Armed Forces and are currently in use world wide.

   
USMC M40A3
Height 0.886’’, diameter 30mm with 1" inserts
P/N 306-24 NSN 5365-09-511-9954
 
USMC M40A3
Standard
Height 1.0”, diameter 34mm
P/N 306-75 NSN 1005-01-537-8618
    
USMC DMR
Height 1.031’’, diameter 30mm
P/N 306-28 NSN 1005-01-521-0922		  
USN EBR Mk14
mod 0 Alloy
Height 1.250’’, diameter 30mm, Alloy EBR
P/N 306-29
     
USMC M107 (SASR)
Extra High
Height 1.49”, diameter 34mm
P/N 306-76 NSN 1005-01-537-8616
 
USMC SASR(M82A2)
Height 1.125’’, diameter 30mm with 1" inserts
P/N 306-39
NSN 1005-01-521-0930

ALLOY RINGS
 
Our Alloy rings are made form Aircraft grade Aluminum alloy and Mil Spec Hard coat anodized matte black. They are made on the same pattern as our steel rings but are almost 50% lighter and strong enough for almost any job.  
Medium 1 piece ring mount
Height .885”, diameter 30mm, length: 3.375", weight: 4.6 oz.
P/N 306-62 Max-Alloy
   

MAX-Alloy Scope Ring
Standard Height
Height 0.823’’, diameter 30mm
306-16

 

MAX-Alloy Scope Ring
High
Height 1.125’’, diameter 30mm
306-17
   
MAX-Alloy Scope Ring
Ultra High (AR-15 flat top)
Height 1.400’’, diam
306-18
  
     
Max-50 Scope Ring
Standard Height
Height 0.823’’, diameter 30mm
P/N 309-19 Max-Alloy
 
Max-50 Scope Ring
Ultra High
Height 1.450’’, diameter 30mm
P/N 306-51 MAX-Alloy

MAX-50 SCOPE RINGS
 
The MAX-50 rings are ONE Inch wide, giving them 60% more holding power than any other ring available. Utilizing 6 #8-40 Torx screws to distribute the load providing the Maximum amount of holding power while minimizing the chance of damaging the scope. Machined from steel as “Matched Pairs” and serialized. Mil-Std-1913 compatible (Picatinny optic mount) designed for the demanding .50 BMG round.  
Max-50 Scope Ring
High
Height 1.125’’, diameter 30mm
P/N 306-13
 
Max-50 Scope Ring
Standard Height
Height 0.823’’, diameter 30mm
P/N 306-11
P/N 309-19 Max-Alloy
 
Max-50 Scope Ring
Ultra High
Height 1.450’’, diameter 30mm
P/N 306-50
P/N 306-51 MAX-Alloy
 
  

SPACERS
 
Scope Ring Reducer
Reduces our 30mm rings down to 1 inch. Will work for any 30mm ring with a width of 5/8’’. (Not for MAX-50 rings)
P/N 306-12 
 
Scope Max-50 Ring Reducer
Made specifically for MAX-50 rings, reduces our 30mm rings down to 1 inch.
P/N 306-15 
   
Mounting rings and bases.pdf 375 kB