All badger scope rails are Milled from pre-hardned 4142 ordnance steel and machined to the 1913 MIL STD (Picatinny) specs and coated with Mil spec Manganese phosphate.

All Badger rails have an integral recoil lug to manage the recoil forces created by heavy Tactical scopes. Torx® screws are supplied for mounting.
Remington 870 Picatinny Scope rail

Mounts to any Remington 870 Shotgun. Made from Ordnance grade steel, Mil spec black Parkerized finish. Rail is 5.5” long.

P/N 500-05 For Remington MCS shotgun
P/N 500-20 For factory drilled Tactical models, 4.7 oz.
 
  P/N 500-05
P/N 500-20
Scope Rail
Remington
Our “Picatinny” spec. one piece mounts are machined from 4142 pre-hardened (28-32Rc) steel. It features an intergraded recoil lug, True Mil-Std-1913 slot pattern for more mounting options. Uses Badger’s Maximized rings or any “Picatinny” compatible ring.

P/N 306-06 - Short action, 20 MOA cant, 4.8 Oz.
P/N 306-46 - Short action, 30 MOA cant for the Schmidt &
Bender PM III 5.0 oz.
P/N 306-06A - Short action, 20 MOA cant, ALLOY, 2 Oz.
P/N 306-06F - Short action, ZERO cant 7.4 oz.
P/N 306-06L - Short action Left hand 20 MOA cant, 4.8 Oz.
P/N 306-56 - Short action Remington 45 MOA for the Schmidt &
Bender 5-25X56 PM ll 5.1 oz.
P/N 306-07 - Long action 20 MOA cant, 5.6 Oz.
P/N 306-47 - Long action, 30 MOA cant for the Schmidt &
Bender PM III 5.7 oz.
P/N 306-07F - Long action, ZERO cant 5.5 oz.
P/N 306-07L - Long action, Left hand 20 MOA cant, 5.6 Oz.
P/N 306-57 - Long action Remington 45 MOA for the Schmidt &
Bender 5-25X56 PM ll 5.7 oz.

Scope Rail
McMillan
P/N 306-101 - For McMillan .50 Cal rifles, 30 MOA cant Picatinny rail. Aluminum alloy. Issue item used on the Mk 15 series rifle, 2.5 oz.

  

Scope Rail
Accuracy International
Flat (Zero cant) Steel base with full length M1913 slots, requires drilling and tapping of the receiver. MIL SPEC Phosphate coating, mounting screws included.

P/N 310-01 - Accuracy International AW&AWP ZERO cant, 4.5 Oz.

Scope Rail
Winchester, FN
P/N 306-06W - Winchester Short action 20 MOA cant, 4.9 Oz.
P/N 306-06WSM - Win Short Mag action 20 MOA cant, 4.7 Oz.
P/N 306-06SPR - FN SPR 20 MOA cant, 4.7 Oz.
P/N 306-07W - Winchester Long action 20 MOA cant, 5.2 Oz.

Scope Rail
Savage
P/N 306-06SAV - Short action, 20 MOA cant, 5.4 Oz.
P/N 306-06SAT - Short action For rifles w/Accutrigger 20 MOA cant, 4.9 Oz.
P/N 306-07SAT - Long action For rifles w/Accutrigger 20 MOA cant, 5.7 Oz.

Scope Rail
Sako
P/N 306-80 - Sako TRG 22/42 20 MOA Picatinny rail, 6.3 oz.
P/N 306-81 - Sako TRG 22/42 35 MOA Picatinny rail, 6.3 oz.

AR Riser Rail
AR Riser rail for flat top style rifles, allows the use of shorter rings and also allows greater latitude for scope placement. The rail is made so that a longer scope can be mounted further forward on AR-16/M16 style rifles. Rail has 22 MOA forward cant. Made from 7075 T6 Aluminum and hard coat anodized matte black.
P/N 249-25 Weight 2.9 oz., Length 5 3/8”, Height .430 high
Lugged Scope Rail
Remington Short Action, for Slotted Actions Only
 Bottomed lugged for clip slotted actions only! This “Picatinny” spec.. One piece mount is machined from 4142 pre-hardened (28-32Rc) steel. A Mil-Std-1913 slot pattern for more mounting options and a 20 MOA. Forward cant for extended range. Uses Badger’s Maximized rings or any “Picatinny” compatible ring. 1/2” longer for night vision options.
P/N 306-06UX - Lugged Scope Rail, Remington Short Action, for Round Rear Bridge Only, 5.1 Oz.
 
Mounting rings and bases.pdf 375 kB
 
.