| |
 | Stabilizer Handguard
AR-15
Ergonomic Beavertail (Trapezoidal) profile and wide flat bottom makes it a natural for Tactical or sport shooting. The handguard is specifically designed to provide a “Stabilized” platform for shooting unlike a round tube handguard. The Stabilizer features Draganov style cooling slots along its length.
P/N 249-04 |
| |
 | Stabilizer Handguard
AR-15 Carbine
The same great Ergonomic Beavertail profile and wide flat bottom as the Stabilizer handguard, just shorter for “carbine” length barrels, and it still sports the Draganov style cooling slots.
P/N 249-05 |
|
| |
 | Stabilizer Handguard
AR-15 Tactical
This version is identical to the 249-04 except it has 3 removable 2.5” long M1913 rail sections that can be positioned along the sides and bottom to accommodate a variety of tactical rifle accessories..
P/N 249-06 |
| |
 |
Stabilizer Handguard
AR-10
Same as the AR-15 Stabilizer guard but with a wider mounting block to accommodate the added weight and recoil of the AR-10. Made with a full length M1913 integral down the full length of the top. Drilled and tapped to accept the Picatinny rail sections. Aluminum alloy, Mil spec hard coat black anodizing.
P/N 425-04 |
|
| |
 | | Stabilizer Handguard
AR-10 Tactical
Same as the 425-04 but includes a 3 pack of 6 slot Picatinny rail sections that can be attached anywhere along the sides or bottom of the guard.
P/N 425-06
 |
Stabilizer Handguard
AR-10 Carbine
Same as the 425-04 but in the Carbine length.
P/N 425-05 |
|
|
|
| | |
 | Picatinny rail sections for Stabilizer handguards
Fits all current versions of the Stabilizer handguard, Sold as a 3 pak w/mounting screws. Can be adapted to almost any use where a short section of M1913 rail is required. Aluminum alloy, Hard coat anodized black, 2.775 long w/ 6 slots.
P/N 249-15 Weight: 3.0 oz. |
| |
 | AR Riser Rail
AR Riser rail for flat top style rifles, allows the use of shorter rings and also allows greater latitude for scope placement. The rail is made so that a longer scope can be mounted further forward on AR-16/M16 style rifles. Rail has 22 MOA forward cant.
Made from 7075 T6 Aluminum and hard coat anodized matte black.
P/N 249-25 Weight 2.9 oz., Length 5 3/8”, Height .430 high |
|
| | | |
 |
Gas Manifold for Mk 12 rifles
This is an exact replica of the gas manifold used on the Mk 12 SOCOM rifles. Fits rifles with a 3/4” (.75).
P/N 249-30 Parkerized Black, Weight: 1.9 oz.
P/N 249-31 SPR style for .825” diameter Bbls. 416 Stainless steel Weight: 1.7 oz. |
| |
|
