EFR – Embedded Front Rail
Allows the use of a universal night sight (A/N PVS-22) on virtually any tactical rifle stock. This mount is bedded into the forend of the rifle stock and allows for up to 7” of rail space due to its reversible top rail. Made from 7075 aluminum alloy. Weight: 7.4 oz.
IMUNS – Integrated Mount Universal Night Sight
Installs into any Accuracy International Chassis (except AS 50’s), replaces the current bipod mounting block and allows the use of clip on night vision devices such as the A/N PVS-22, A/N PVS-24, A/N PVS-27 or other devices like thermal imagers or fusion devices. The IMUNS has a side accessory rails that allow the use of laser aiming devices such as the ATPIAL/DBAL and all other issued aiming lasers. The mount retains the bipod socket for the AI bipod and also allows for the use of a Harris style bipod. No permanent modification is required. Weight: 12.0 Oz.
EFR / IMUNS Accessory Rail
The EFR and IMUNS both include one side accessory rail, but for applications that require an additional side rail, we offer them individually. Includes neccessary mounting hardware. Mil Spec black anodized aluminum. Weight: 1.48 oz.
SNAP – Scope, Night Vision Adapter, Pocket
The SNAP (Scope, Nightvision Adapter, Pocket) easily fits any A/N PVS-14 to the rear of the M151 Spotting scope (Leupold 12-40X60). Installs/Removes in about 5 seconds without any tools. The SNAP allows the spotter to be powered up to 40X without degradation of the image. An issue LIF (Laser Interference Filter) can be used on the on the PVS-14 to protect the observer from stray laser light. Mil Spec anodized aluminum. Diameter: 1.98”, Lenght: 1.96”, Weight: 2.23 oz.
S²NVI – Spotting Scope Night Vision Integrator
The S²NVI (Spotting Scope Night Vision Integrator) is a new interface system optimized for attaching a night vision system to the M151 Spotting Scope (Leupold MK4 12-40×60mm). The S²NVI is modular by design, allowing the scope to be mounted with the eye piece in either a high or low orientation, features multiple mounting holes for adjusting center of balance, accessory rails mountable at two different heights, quick attach/detach system, and nestling capability for easy storage and transport. Aerospace-grade aluminum alloy construction, hardcoat Mil Spec anodized finish. Weight: 12.4 oz.
SLAM, Side Laser Aiming Mount
Designed for the Mk 15 and M107 sniper rifles. The SLAM allows the mounting of a laser aiming devise such as the PAQ-4, PEQ-2, VITAL, ATPIAL and all other M1913 rail accessories. Simply mounts to any open space of top rail that is 4 slots wide. Made from 7075 Aluminum alloy. Weight: 2.4 oz.
SIMRAD Cap for Mk11 Mod 0
SLAM Mk II, Side Laser Aiming Mount
Designed for the M240 and M249 machine guns. The SLAM allows the mounting of laser aiming devises such as the PSQ-23 (STORM), ATPIAL/DBAL and all other issued aiming lasers and other M1913 rail accessories. Simply mounts to any open space of top rail that is 3 slots wide. Mounts the device vertically and close to the optic for close alignment. Supplied with a short 1913 rail and a long rail (for STORM). Mil Spec anodized aluminum. Weight: 2.5 oz.
Imuns Lower Accessory Rail Kit replaces the Harris bipod mount on your Badger Ordnance IMUNS so you can mount M1913 rail compatible bipods. Includes mounting hardware and wrench. Mil Spec black anodized aluminum. Weight: 1.28 oz.